Primary E with Phono

Fitting the lid
Fit the lid (dust cover) carefully over the hinge prongs and adjust the screws (9) until the lid stays open
where you want it to without being too stiff to open or close.
Switching on and off
Pressing the power switch (1) alternately starts or stops the motor.
Changing replay speed
Put the belt over the larger diameter part of the motor pulley (2). To revert to 33 r.p.m. repeat the
proceedings using the smaller step on the pulley.
Maintenance and cleaning
Your record player requires little or no regular maintenance. Remove dust with a slightly moistened
antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust!
Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid
damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is
carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal
stretching.
Fitting and connecting the cartridge
All cartridges with half inch mounting holes can be mounted. Leave the needle's protection cover on,
fit the cartridge to the headshell by using the supplied screws by passing one screw through each slot
in the headshell (8). Do not tighten the nuts yet.
Connect the tonearm wires with the cartridge pins as follows:
white left channel positive (L+)
red right channel positive (R+)
green right channel return (R -)
blue left channel return (L -)
The full sound quality of the record player can only be achieved if the cartridge is adjusted correctly.
Particular tools like the Pro-Ject Audio Systems alignment tool are required to accomplish this job properly.
If you are not well acquainted with the adjustment of cartridges, please call for the willing help of your
Pro-Ject Audio Systems dealer. 

• Built-in Phono stage
• Switchable Phono and Line output
• Belt-drive with synchronous motor
• Ortofon quality pickup
• Vibration absorbing feet
• NO plastic
• CNC‘d special composit fibre chassis
• Highly precise and light aluminium tonearm
• Saphire-tonearm bearing
• Gold-plated contacts
• Stainless steel bronze bushing
• Elegant dustcover with adjustable hinges
• Silicon belt with optimum dampening
• Hand-made in Europe

Outputs: RCA Phono/Line
Speed: 33,45 (manual speed change)
Principle: Belt drive
Speed variance: 33: 0.8% 45: 0.7%
Wow & Flutter: 33: 0.29% 45: 0.27%
Platter: 300 mm with felt mat
Main bearing: Stainless steel
Tonearm: 8.6” aluminium
Effective arm length: 218.5 mm
Overhang: 22.0 mm
Effective tonearm mass: 8.0 g
Counterweight for mass: 3 - 7 g (pre-mounted)
Tracking force range: 0 - 25mN (17.5 mN pre-adjusted)
Included accessories: Dustcover
Power consumption: 4.5 Watt max
Dimensions: 420 x 112 x 330 mm (WxHxD)
Weight: 4.0 kg net